Waterproofing Products - INNO-SEAL
Waterproofing Products - INNO-SEAL

Su Yalıtımı Ürünleri

Filter
  • FOX AQUAROOF SR
    • FOX AQUAROOF SR

    • FOX AQUAROOF SR

    • WATERPROOFING & SOLAR REFLECTION & DIRT RESISTANT High Solar Reflectance, Pollution Resistant, UV Resistant, Super Flexible Waterproofing Description FOX AQUAROOF SR, elastomeric resin-based, fiber-reinforced, ready-to-use super flexible waterproofing material that provides energy savings by reducing the roof surface temperature, thanks to its high sunlight reflectivity, and has increased pollution resistance.          
  • FOX CRYSTALISER FS265
    • FOX CRYSTALISER FS265

    • FOX CRYSTALISER FS265

    • Cement Based, Crystallized, Active Hydrophobic Waterproofing Material Description FOX CRYSTALISER FS265 is cement based, one component, ready to use, hydrophobic reaction, waterproofing material applied against active, negative and positive water pressure. In compliance with EN 1504-2:2004 / Principle 2.2 and 8.2.
  • FOX EPOCOTE® FS190FOX EPOCOTE® FS190
  • FOX MULTIPLUS® 2K FS542
    • FOX MULTIPLUS® 2K FS542

    • FOX MULTIPLUS® 2K FS542

    • FOX MULTIPLUS® 2K FS542 is cement and polymer modified, bitumen-rubber based, two component, solvent-free, elastic waterproofing material with crack bridging feature. In compliance with EN 15814+A2:2015 CB1-W1-C2A-R1 standards. Public Works Pos. No: 04.379/I07 CB1: ≥1mm Static Crack Bridging W1: 0,0075 N/mm² Pressure Water Impermeability C2A: 0,30 MN/m² Compressive Strength R1: ≤ Rain Resistance After 24 Hours
  • FOX MULTIPLUS® 2K FS542 PLUS FIBER
    • FOX MULTIPLUS® 2K FS542 PLUS FIBER

    • FOX MULTIPLUS® 2K FS542 PLUS FIBER

    • FOX MULTIPLUS® 2K FS542 PLUS FIBER is cement and polymer modified, bitumen-rubber based, two component, fiber reinforced, solvent-free, elastic waterproofing material with crack bridging feature. In compliance with EN 15814+A2:2015 CB2-W2A-C2A-R2 standards. Public Works Pos. No: 04.379/I07 CB2: ≥2mm Static Crack Bridging W2A: 0,075 N/mm² Pressure Water Impermeability C2A: 0,30 MN/mm² Compressive Strength R2: ≤ Rain Resistance After 8 Hours
  • FOX MULTIPLUS® DUALGUM 1K
    • FOX MULTIPLUS® DUALGUM 1K

    • FOX MULTIPLUS® DUALGUM 1K

    • FOX MULTIPLUS® DUALGUM 1K is an ultra-elastic, water-based liquid membrane with colloidal dispersion polymer modified, bitumen-based, one-component, crack-bridging feature. Besides ultra-high application efficiency is a very fast-drying waterproofing material. A highly adhesive bituminous emulsion with high elasticity that adheres to concrete and metal surfaces. In compliance with TS EN 15814 CB2-W2A-C2A standards. CB2:≥ 4mm Crack Bridging W2B: 0,075 N/mm² Impermeability…
  • FOX MULTIPLUS® DUALGUM 1K SPRAY
    • FOX MULTIPLUS® DUALGUM 1K SPRAY

    • FOX MULTIPLUS® DUALGUM 1K SPRAY

    • FOX MULTIPLUS® DUALGUM 1K SPRAY colloidal dispersion based, one component, water based liquid membrane.  Fast curing waterproofing material with ultra-high application efficiency. It is a bitumen emulsion with high elasticity feature and adheres to concrete and metal surfaces perfectly. Presents perfect solution in vertical applications. In compliance with TS EN 15814+A2 CB2-W2B-C2B-R2 conditions. CB2: ≥ 4mm Static Crack Bridging W2B: 0,075…
  • FOX MULTIPLUS® DUALGUM 1K UV
    • FOX MULTIPLUS® DUALGUM 1K UV

    • FOX MULTIPLUS® DUALGUM 1K UV

    • One Component, Colloidal Dispersion Polymer Based UV Resistant Topcoat Coating Material Description FOX MULTIPLUS® DUALGUM 1K UV, is a colloidal dispersion polymer based, one component, water based, top coat coating material that provides the protected from UV and climate conditions of FOX DUALGUM® series waterproofing materials.
  • FOX MULTIPLUS® DUALGUM PRIMER 1K DG
  • FOX MULTIPLUS® DUALGUM PRIMER SL
  • FOX MULTIPLUS® DUALGUM REACTIVEFOX MULTIPLUS® DUALGUM REACTIVE
    • FOX MULTIPLUS® DUALGUM REACTIVEFOX MULTIPLUS® DUALGUM REACTIVE

    • FOX MULTIPLUS® DUALGUM REACTIVE

    • FOX MULTIPLUS® DUALGUM REACTIVE resistant to heavy conditions, two components, colloidal dispersion polymer modified, bitumen-rubber based, water based liquid membrane. Fast curing waterproofing material with ultra-high application efficiency. It is a bitumen emulsion with high elasticity feature and adheres to concrete and metal surfaces perfectly. When reinforced with non-woven geotextile mat creates excellent membrane. In compliance with TS EN 15814+A2 CB2-W2B-C2B-R3 standards.…
  • FOX MULTIPLUS® FS540
    • FOX MULTIPLUS® FS540

    • FOX MULTIPLUS® FS540

    • Bitumen-Rubber Based, Single Component, Flexible Waterproofing Material Description FOX MULTIPLUS® FS540, bitumen-rubber based, one-component, solvent-free, ready-to-use, flexible waterproofing material with crack bridging feature. It meets the requirements of EN 15814:2011+A2:2014 - CB1-W1-C1. CB1 : ≥ 1mm Static Crack Bridging W1  : 0,0075 N/mm2 Pressured Water Permeability C1    : 0,06 MN/m² Compressive Strengt
  • FOX MULTIPLUS® FS540 PLUS
    • FOX MULTIPLUS® FS540 PLUS

    • FOX MULTIPLUS® FS540 PLUS

    • FOX MULTIPLUS® FS540 PLUS is bitumen-rubber based, one-component, solvent-free, ready-to-use, crack-bridging, elastic waterproofing material. In compliance with TS EN 15814+A2:2015 CB2-W2A-C2A standards. Public Works Pos. No: 04.379/I06 CB2: ≥ 2mm Static Crack Bridging W1: 0,0075 N/mm2 Impermeability to water in pressure C2A: 0,30 MN/m² Pressure Resistance
  • FOX MULTISEAL® 1K FS365
    • FOX MULTISEAL® 1K FS365

    • FOX MULTISEAL® 1K FS365

    • FOX MULTISEAL® 1K FS365, is cement based, polymer reinforced, one component, waterproofing material designed to be applied to all kinds of reinforced concrete surfaces and cement based plaster floors. Public Works Pos. No: 04.477/2
  • FOX MULTISEAL® FS367FOX MULTISEAL® FS367
    • FOX MULTISEAL® FS367FOX MULTISEAL® FS367

    • FOX MULTISEAL® FS367

    • Cement and Polymer Dispersion Based, Two Component, Semi-Elastic Waterproofing Material Description FOX MULTISEAL® FS367, cement and polymer dispersion based, two component, semi-elastic waterproofing material designed for all kinds of reinforced concrete surfaces and cement-based plasters. It meets the requirements of EN 1504-2 / Principles 2.2 and 8.2.
  • FOX MULTISEAL® FS477FOX MULTISEAL® FS477
    • FOX MULTISEAL® FS477FOX MULTISEAL® FS477

    • FOX MULTISEAL® FS477

    • Cement and Polymer Dispersion Based, Two Component, Fully Elastic Waterproofing Material Description FOX MULTISEAL® FS477, cement and polymer dispersion based, two component, fully elastic waterproofing material that can be used under coating in wet areas such as balconies, terraces, bathrooms, indoors and outdoors. TS EN 14891:2017 wet areas comply with the standard for waterproof products applied in liquid form for…
  • FOX MULTISEAL® FS478FOX MULTISEAL® FS478
  • FOX MULTISEAL® FS488FOX MULTISEAL® FS488
  • FOX MULTISEAL® STANDARTFOX MULTISEAL® STANDART
  • FOX MULTISEAL®-UV FS475FOX MULTISEAL®-UV FS475
    • FOX MULTISEAL®-UV FS475FOX MULTISEAL®-UV FS475

    • FOX MULTISEAL®-UV FS475

    • Cement and Acrylic Based, Resistant to UV Rays, Two Component, White, Elastic Waterproofing Material Description FOX MULTISEAL®-UV FS475, cement- and acrylic-based, two-component waterproofing material that is resistant to UV rays, resilient to water-borne salts and an effective barrier against atmospheric gases.
  • FOX PURMAX SPRAYTEC® FS570FOX PURMAX SPRAYTEC® FS570
    • FOX PURMAX SPRAYTEC® FS570FOX PURMAX SPRAYTEC® FS570

    • FOX PURMAX SPRAYTEC® FS570

    • Polyurethane Based, Two Component, Solvent Free, Fast Curing, Waterproofing Membrane Applied with Special Spray Machines Description FOX PURMAX® SPRAYTEC FS570 is a polyurethane-based, two-component, solvent-free, crack-bridging waterproofing membrane that does not lose its flexibility over time, cures quickly and does not form joints. Thanks to its application speed and fast curing feature, it minimizes the dwell time of the enterprises…
  • FOX PURMAX® 1K FS401
    • FOX PURMAX® 1K FS401

    • FOX PURMAX® 1K FS401

    • Polyurethane Based, One Component, Waterproofing Coating Description FOX PURMAX® 1K FS401, one component, polyurethane based, 400% elastic, point impact resistant, low viscosity, cold applied insulation material. It complies with EN 1504-2:2004 standard.
  • FOX PURMAX® 1K FS601
  • FOX PURMAX® 2KFOX PURMAX® 2K
    • FOX PURMAX® 2KFOX PURMAX® 2K

    • FOX PURMAX® 2K

    • FOX PURMAX® 2K, Polyurethane based, two component, low viscosity, liquid insulation material developed for waterproofing and protection. FOX PURMAX® 2K has excellent resistance to chemical, mechanical and thermal conditions thanks to pure elastomeric hydrophobic polyurethane resin and special inorganic filler content.
  • FOX PURMAX® AQUA FS770FOX PURMAX® AQUA FS770
  • FOX PURMAX® BETOP FS774
    • FOX PURMAX® BETOP FS774

    • FOX PURMAX® BETOP FS774

    • FOX PURMAX® BETOP FS774 is a top coat coating material, chlorine-rubber based, solvent based, UV resistant, and aliphatic, one component, ready to use, resistant to pool chemicals, acid, chlorine, oxidizer and bleaching chemicals.
  • FOX PURMAX® BT2K FS702FOX PURMAX® BT2K FS702
    • FOX PURMAX® BT2K FS702FOX PURMAX® BT2K FS702

    • FOX PURMAX® BT2K FS702

    • Bitumen-Polyurethane Based, Two Component, Elastic, Waterproofing Material Description FOX PURMAX® BT2K FS702, It is a two-component, elastic, bitumen-polyurethane based waterproofing material with high mechanical strength, does not affected by the relative humidity in the environment. It meets the requirements of EN 1504-2:2006 / Principle 1.3, 2.2, 8.2.
  • FOX PURMAX® EP 2KFOX PURMAX® EP 2K
    • FOX PURMAX® EP 2KFOX PURMAX® EP 2K

    • FOX PURMAX® EP 2K

    • FOX PURMAX® EP 2K, Epoxy polyurethane based, low viscosity, liquid insulation material developed for two-component waterproofing and protection. FOX PURMAX® EP 2K, thanks to pure elastomeric hydrophobic epoxy polyurethane resin and special inorganic filler content, has excellent resistance to chemicals, especially for cold conditions.
  • FOX PURMAX® POLYUREA TOPCOATFOX PURMAX® POLYUREA TOPCOAT
  • FOX PURMAX® PRIMER 1K
  • FOX PURMAX® PRIMER 1K RAPID
  • FOX PURMAX® SPRAYTEC FS560FOX PURMAX® SPRAYTEC FS560
    • FOX PURMAX® SPRAYTEC FS560FOX PURMAX® SPRAYTEC FS560

    • FOX PURMAX® SPRAYTEC FS560

    • FOX PURMAX® SPRAYTEC FS560 is a 100% Polyurea based, two component, waterproofing membrane that can be applied to virtually any climatic condition thanks to its solvent-free, crack-bridging, fast curing, unique chemical structure. Due to the application speed and quick curing feature, it minimizes the downtime of the facilities compared to the traditional waterproofing products. The reaction is very fast and can…
  • FOX PURMAX® SPRAYTEC FS561FOX PURMAX® SPRAYTEC FS561
    • FOX PURMAX® SPRAYTEC FS561FOX PURMAX® SPRAYTEC FS561

    • FOX PURMAX® SPRAYTEC FS561

    • Hybrid Polyurea Based, Two Component, Elastic, Fast Curing, Waterproofing Membrane Applied with Special Spray Machines Definition FOX PURMAX® SPRAYTEC FS561 is a Hybrid Polyurea-based, two-component, solvent-free, crack-bridging waterproofing membrane that does not lose its flexibility over time, cures quickly, can be applied in almost all climatic conditions thanks to its unique chemical structure, and does not form joints. Thanks to…
  • FOX PURMAX® SPRAYTEC FS562FOX PURMAX® SPRAYTEC FS562
    • FOX PURMAX® SPRAYTEC FS562FOX PURMAX® SPRAYTEC FS562

    • FOX PURMAX® SPRAYTEC FS562

    • FOX PURMAX® SPRAYTEC FS562 is polyurethane based, two component, solvent-free, elastic, crack-bridging, fast-curing, non-splice waterproofing membrane that does not lose its flexibility over time. Due to the application speed and fast curing feature, it minimizes the downtime of the facilities compared to the traditional waterproofing products. The reaction is very fast and can be applied with the help of special spray…
  • FOX PURMAX® TOPCOATFOX PURMAX® TOPCOAT
  • FOX PURMAX® ULTRAFOX PURMAX® ULTRA
    • FOX PURMAX® ULTRAFOX PURMAX® ULTRA

    • FOX PURMAX® ULTRA

    • FOX PURMAX® ULTRA is a polyurea based, two component, aliphatic, can be applied with hand single layer, liquid applied, cold applied, low viscosity liquid insulation material developed for waterproofing and protection. FOX PURMAX® ULTRA has excellent resistance to UV rays, chemical, mechanical and thermal conditions thanks to its pure elastomeric hydrophobic modified polyurea resin and special inorganic filler content.
  • FOX PURMAX® WB 1KFOX PURMAX® WB 1K
    • FOX PURMAX® WB 1KFOX PURMAX® WB 1K

    • FOX PURMAX® WB 1K

    • FOX PURMAX® WB 1K polyurethane modified acrylic resin and water based, UV resistant, aliphatic, one component, ready-to-use, applied on roof,  terrace and prefabricate concrete gutters, elastic waterproofing material
  • FOX SULPHATSEAL FS275
    • FOX SULPHATSEAL FS275

    • FOX SULPHATSEAL FS275

    • FOX SULPHATSEAL FS275, cement based, one component, polymer reinforced, sulphate resistant, resistant to mechanical and chemical effects found in domestic wastewater, applied on concrete or cement based plaster internally or externally, waterproofing material.
  • FOX ULTRASEAL® RAPIDFOX ULTRASEAL® RAPID
  • FOX ULTRASEAL®-UV FS485FOX ULTRASEAL®-UV FS485
  • FOX ULTRATEX
    • FOX ULTRATEX

    • FOX ULTRATEX

    • Three Layer Water and Moisture Insulation Membrane Description FOX ULTRATEX is a 3-layer water and moisture insulation membrane with crack bridging feature that can be used under ceramic and natural stone applications, on walls and floors. Fox Ultratex Membrabe Brochure
  • FOX ULTRATEX PLUS
    • FOX ULTRATEX PLUS

    • FOX ULTRATEX PLUS

    • 3 Katlı Su ve Nem Yalıtım Membranı Tanımı FOX ULTRATEX PLUS, Seramik, doğal taş uygulamaları altında, duvarda ve zeminde kullanılabilen, çatlak köprüleme özelliğine sahip 3 katlı su ve nem yalıtım membranıdır.
  • FOX WATERPROF® FS100FOX WATERPROF® FS100
  • FOX WATERPROF® FS100 ELYAFLI
  • FOX WATERPROF® FS105FOX WATERPROF® FS105
    • FOX WATERPROF® FS105FOX WATERPROF® FS105

    • FOX WATERPROF® FS105

    • Ready-to-Use Elastic Waterproofing for Under Ceramics, Bathrooms and Showers Description FOX WATERPROF® FS105, is an elastomeric resin-based, one-component, ready-to-use elastic waterproofing material applied under ceramics in wet areas. EN 14891:2017 / DMO1P & EN 1504-2:2005 / 1.3, 2.2, 8.2 Ministry of Public Works and Settlement Item No: 04.509