FOX EPOTHANE® PRIMER FL-HB

Epoxy Based, for Moisture Surfaces, Filled, Solvent-Free, Primer

Description
FOX EPOTHANE® PRIMER FL-HB, epoxy-based, two-component, filled, solvent-free, low-viscosity primer set that forms an anti-moisture layer.


Download TDS

Beschreibung

Fields of Application

  • On dry, moist, fresh concrete,
  •  On dry, damp, even non-blasted steel,
  • Shiny and smooth surfaces,
  • As a primer before epoxy and polyurethane coatings,
  • As a binder for epoxy-based correction mortars and screeds,
  • It is used as a repair and filling mortar by mixing with silica sand at the appropriate level.
  • As a primer under FOX EPOTHANE® series epoxy floor coverings,
  • As a primer under FOX PURATHANE® series polyurethane floor coverings,
  • FOX PURMAX® series is used as a primer under polyurethane waterproofing coatings.

Advantages

  • It is used indoors and outdoors.
  • It can be applied under +10°C, up to 100% relative humidity and completes its curing.
  • Provides good corrosion protection on steel.
  • It has high chemical and mechanical resistance.
  • Despite its high mechanical properties, it is flexible and does not lose its flexibility over time.
  • A high amount of filling can be entered into it.
  • Easy to apply.
  • Surface adherence is excellent.
  • Excellent adhesion to glossy, glassy and smooth surfaces.
  • It is liquid and moisture impermeable.
  • Non-slip surface can be obtained.
  • Solvent-free.
  • It has low viscosity; it can be applied easily even in cold weather.
  • It has high adhesion strength to dry, moist and fresh concrete.
  • It can be applied in open area after rain and on concrete cleaned with water jet.